How to put on a western saddle

1. Prepare Your Horse:
   • Ensure your horse is calm and tied securely to prevent movement.http://thesaddlehouse.com
   • Brush your horse to remove dirt and debris from the saddle area.
2. Assess the Saddle Pad:
   • Use a saddle pad or blanket to protect your horse’s back. Lay it flat along the back, positioning it slightly forward to account for saddle placement.
3. Position the Saddle:
   • Stand on the horse’s left side. Hold the saddle by the horn and gently swing it up towards the horse’s back.
   • Aim to set the saddle approximately 1-2 inches behind the shoulder blade for proper fit.
4. Set the Saddle Down:
   • Lower the saddle onto the saddle pad gently, ensuring it settles evenly on both sides.
   • Check for proper alignment: the saddle should sit squarely on the horse’s back.
5. Secure the Girth:
   • Move to the right side of the horse and grab the girth. Bring it underneath the horse’s belly and attach it to the cinch on the left side.
   • Make sure the girth is snug but not overly tight, allowing the horse to move comfortably.
6. Adjust the Saddle:
   • Check the fit of the saddle by placing a fist between the saddle and the horse’s back. Ensure that it sits evenly without pinching.
   • Adjust the girth as needed for security, checking from both sides.
7. Final Check:
   • Inspect the saddle’s placement and alignment, making sure it is secure and comfortable.
   • Ensure all straps and equipment are properly fastened.
8. Get Ready to Ride!
   • Once satisfied with the saddle fit, mount your horse and enjoy the ride!

Tips:

• Always check the saddle fit periodically while riding to ensure it remains comfortable for your horse.
• If you are unfamiliar with saddling, consider seeking guidance from an experienced rider or equestrian professional.

How to measure a western saddle gullet

1. Gather Your Tools:
   • A measuring tape (preferably a flexible one).
   • A helper (optional, but can be useful).
2. Prepare the Saddle:
   • Place the saddle on a flat surface or a saddle rack, ensuring that it is upright and stable.
   • If available, use a saddle pad to approximate the fit as it would be on a horse.
3. Locate the Gullet:
   • The gullet is the space in the saddle tree that runs along the spine of the horse, allowing clearance and preventing pressure on the withers.
   • It’s typically the area directly under the saddle horn and above the saddle skirt.
4. Measure the Width of the Gullet:
   • Using your measuring tape, measure the width of the gullet at its widest point (usually near the front of the saddle).
   • Ensure that the tape is straight and parallel to the ground for an accurate measurement.
   • Record the measurement in inches.
5. Optional: Measure the Length:
   • If needed, you can also measure the length of the gullet to get a better idea of fit. This measurement can be taken from the front of the gullet to the back, following the curve.
6. Interpret the Measurement:
   • Common gullet widths vary:
     • Narrow gullet: 6.5 inches or less
     • Medium gullet: 7 inches
     • Wide gullet: 7.5 inches or more
   • Choosing the right width is crucial and can depend on your horse’s withers and back shape.

Additional Tips:

• Always have your horse’s measurements in mind when fitting a saddle. A proper gullet ensures comfort and safety.
• If you’re unsure about the fit, consider consulting with a saddle fitting professional.https://westerngearshop.com